Damn GT-R turbos need rebuild

Tuesday, 24 August 2004 | Comments (2) | Categories: Engine

Another set back - and it seems the curse has been passed onto the turbos, I had them checked at Performanz for a prospective buyer only to find out they need to be rebuilt. So, although it will cost money, I need to sell them rebuilt to make enough out of them. Will also try and recoup costs in the final pricing.

At least I'll feel comfortable in selling them once they've been rebuilt.

UPDATE ON OTHER PARTS:

As for the other parts that are left, well, there's the air filters and adaptors, gearbox and turbos that are left. I'm thinking I may as well just keep the filters for the Silvia, and the exhaust which I thought would never go went on Saturday. Unfortunately out of the money I've made on selling the parts, I have had to purchase the bunky for $1500 and have paid close to an additional $1500 for parts and labour to get her running well again!

Oh well. I've managed to pick up a couple of private jobs lately which should help the cause.

The Plan

Tuesday, 24 August 2004 | Comments (4) | Categories: Engine

Starting point: 1993 Nissan (S13) Silvia Shell

Updated: 20 July, 2010

SUSPENSION & DRIVELINE:
- RG JTC'N1 Damper V-Stage Coilovers
- Nismo Rear Cradle (subframe) Bushes
- Kazama Pillow Ball Tension Rod
- Kazama (rear) S13 Arm Set (upper and lower arms)
- Kazama Super Strengthened Tie Rods
- Kazama Super Tie Rod Ends
- Nismo Power Brace
- Rear Lower Tie-Rod Brace
- Do-Luck 'Style' Front Ladder Brace
- URAS Floor Reinforcement Kit (extends LH chassis rail)
- Cusco OS Front and Rear Strut Tower Braces
- Cusco Rear OST Brace (triangulates to floor)
- Zenith Tuning Rear Boot Brace
- Whiteline Front and Rear Sway bars
- Front 5-stud Hub Conversion (Just Jap)
- Rear 5-stud Hub Conversion (R33 GT-R)
- R33 GT-R Brembo Brake Calipers front and rear
- R32 GT-R N1 Brake Master Cylinder (1" BM50)
- DBA4000 Brake Rotors front and rear
- Maltech Custom (ADR Approved) Brake Lines
- Wedsport TC 105N Lightweight Alloy Wheels (18x9.5+10F, 18x10.5+12R)
- Federal 595 RS Tyres (Front 235/40ZR18, Rear 265/35ZR18)
- OS Giken STR Twin-plate Clutch
- B&M; Short-shift Kit
- Skyline GT-R Diff and Half Shafts

ENGINE:
- SR20DET
- Rebuilt with Z32 Pistons and Eagle Rods
- Head Service (head previously ported in Japan)
- GReddy Camshaft PRO - IN264deg/11.5mm EX264deg/11.5mm
- Tomei Type A Valve Springs
- Adjustable Cam gears
- Tomei RAS
- Tomei Metal head gasket
- Trust (GReddy) Sump (Genuine)
- Nissan SR20DET GTi-R Oil Pump
- Trust (GReddy) Oil Cooler Kit (thermostat incl.)
- Nismo 740cc Injectors
- Bosch Motorsport 044 Fuel Pump (in-tank)
- Tubular Manifold - we think it's HKS (ceramically coated)
- HKS GT-RS Turbocharger (turbine housing ceramically coated)
- HKS Dump Pipe (ceramically coated)
- HKS Front Pipe (ceramically coated)
- MetalCat Hi-flow Catalytic converter
- Dual N1 Cat-back Exhaust System
- Hybrid GT Intercooler Kit
- GReddy Surge Tank (Intake Plenum)
- K&N; Filter
- Apexi Power FC + Commander ECU (for S15 plug)
- GReddy Oil/Air Seperator
- Nismo Engine Mounts
- Nismo Gearbox Mounts
- Lightweight Pulley Kit
- GFB Lightweight Crank Pulley (modified for GTi-R Oil Pump)
- GReddy Type-R BOV
- Hi Octane Racing Radiator Air Guide

BODY:
- Wise Sports Front (25mm) and Rear (50mm) Wide Body Guards
- Nissan Aero Kit (Nismo) Front Bar
- Nissan Aero Kit (Nismo) Side Skirts
- Nissan Aero Kit (Nismo) Rear Pods
- Painted in Mazda 'Velocity Red'
- Underbody painted PPC Chassiscoat 'Satin Black'
- Remove rear wing
- Remove rear badge
- East Bear Clear Front Indicators
- Ganador Mirrors
- Nissan Aero Kit (Nismo) Grill
- CA18 Boot Lock

INTERIOR:
- Nardi Deep Corn Leather Steering Wheel for Road
- Nardi Deep Corn Suede Steering Wheel for Track
- R34 GT-R Front Seats
- Re-trimmed S13 Rear Seats
- 60mm Defi-Link Meters (Oil Pressure, Oil Temp, Water Temp, Boost)
- Custom Dash Gauge Cluster (later)
- Alpine iDA-X001 Digital Media Receiver
- Alpine DLX-F177 DDLinear 6.5" Flagship Component 2-way
- Alpine SWX-1042D Type-X 10" Sub in removable Sub box
- Alpine PDX 1.1000 Mono and PDX 2.150 Digital Amplifiers
- Trust Shift Knob
- New plush pile mats
- Alarm/Immobiliser/Keypad
- Custom Spec B Badging

HKS GT-RS Turbo on the way!

Thursday, 19 August 2004 | Comments (0) | Categories: Engine

Well, I found a sweet deal on www.nissansilvia.com for an HKS GT-RS Turbine Kit (for SR20DET) at only $2350 delivered within Australia. I couldn't pass it up so I got it asap. Should be here next week. Got this through Flying Performance International in Sydney:

http://www.flyn.com.au/

Here's a quick product speel on it:

HKS just released another full ball bearing turbocharger GT-RS. This kit is an upgrade over the GT25/40 with alittle bigger turbo specs, retains full ball bearing capability and great for spool up and anyone looking for a potent street vehicle.

SPECIFICATIONS:

Power:
- HKS GT-RS - 400HP Output

Compressor:
- Wheel- 52 Trim - 51.2 Inducer / 71.1 Major
- Housing- 60 Inlet / 50 Outlet - 0.60 A/R

Turbine:
- Wheel- 76 Trim - 53.8 Major / 47.0 Exducer
- Housing- GT25 inlet / Internal GT25 outlet; 0.64 A/R

The kit will come with all the accessories for bolt on.

HKS Dump and Sard 550cc Injectors arrive

Thursday, 12 August 2004 | Comments (2) | Categories: Engine

Not being known to muck around, I've already started getting in parts for the Silvia project as I sell the parts from the GT-R. I went ahead and found a well priced set of Sard 550cc injectors for the SR20DET and a genuine HKS Turbo Dump (extension) pipe in stainless.

It all begins again...why do I do it to myself.

Say good bye to GT-R

Tuesday, 10 August 2004 | Comments (0) | Categories: Engine

Well the insurance company paid out and I bought back the wreck. I've taken as many parts off as possible while still keeping it rolling, and have put adverts up on Skylines Australia and Skylines Downunder in an effort to sell all the parts off it.

I will be keeping some parts of the GT-R for Silvia though:
- R33 GT-R Brembo brakes (front and rear)
- R32 GT-R front-mount intercooler (to be fitted to Silvia using an East Bear I/C piping kit)
- R32 GT-R front seats
- Bosch Motorsport 040 600hp fuel pump
- Buddy Club P1 Racing QF's (18x10's)
- Initial stereo system from GT-R

The engine will be going to Jeff Ash at C-Red along with the shell which he has already hatched plans for.

Cheers
Brendan

Almost about to start

Monday, 12 July 2004 | Comments (0) | Categories: Engine

Well, still awaiting word back from the insurance company regarding the fate of my GT-R, but should know very soon. That's when this blog will get going.
Page 18 of 18 pages « First  <  16 17 18