Drum and Bass, I mean Hubs and Brakes (sorry, bad humour friday)
Friday, 21 July 2006 | Comments (2) | Categories: Brakes, Driveline
Here's a pic of the R33 GT-R hubs I cleaned up and painted last week. These will match up with the GT-R half-shafts and of course the 5-stud hubs I have for the front.
Also mentioned previously that I straightened and painted up the R33 GT-R rear brakes disc shields, so here's a pics, along with one of my new rear DBA4000 rotors sitting inside it. Fronts are on back-order from Victoria.
- DBA4000 4929 (Front of Disc)
- DBA4000 4929 (Back of Disc)
- DBA4000 4929 (Box)
Front DBA4000 Specifications:
- Model: DBA 4928S (S = Slotted)
- Diameter: 324mm
- Thickness: 30mm (Minimum 28mm)
Front DBA4000 Specifications:
- Model: DBA 4929S (S = Slotted)
- Diameter: 300mm
- Thickness: 22mm (Minimum 20mm)
This discs are specified to be used with the R32 GT-R V-spec, R33 GT-R and R34 GT-R Brembo brakes which I have. Back to the workshop tomorrow for (fingers crossed) some bolting things together.
Cheers
Brendan
Your Comments
Posted by CarbonClad | 4 June 2009 at 04:19 PM
Great blog! how much did u pay for the DBA rotors? I have the same front/rear brakes as you in my S15 and I am thinking of changing out the stock rotors.
——-
Posted by Brendan Underwood | 4 June 2009 at 04:27 PM
Thanks mate. Unfortunately it was so long ago I've forgotten how much. I think it was around the $450/pair mark, but don't quote me on that.